Alex "catman"
CLARET CDC BUBBLE HOPPER
Hook - Kamasan B400
Thread - Claret 8/0
Body – Dubbed Claret (Possum / Kangaroo)
Rib - stretched pearl tinsel
Bubble Wing – Natural CDC
Thorax - Dubbed Claret (Possum / Kangaroo)
Legs – Knotted Pheasant Tail Fibres (tied in 3’s)
Step 1Mount the hook in the vice, attach the thread, wind down to the bend catching in a piece of red Holographic Tinsel as a tail piece wind it round the bend about 3mm and back to your tying thread. Catch in the Pearl Tinsel rib & 2 sets of legs as you go back towards the eye of the hook, then return thread to the bend.
Step 2Sparsely dub thread and Wind forward followed by the rib(in the opposite direction)
leaving enough room for a thorax & a head.
Step 3Catch in the two CDC feathers, these will form the bubble.
Step 4Add another generous pinch of dubbing to the thread, then wrap to form the thorax.
Step 5Pull the two CDC fibres over to form the bubble, leave any straggly fibres as they are. You can alter the size of the bubble wing to suit using a needle.
Step 6Prepare the Hackle by snipping the centre, wrap hackle around 2 or 3 times trim the waste hackle and cover the butts with tight turns to form a small head, whipfinish and varnish for the completed fly.
Alex