Here is a step by step to a simple little pattern that has accounted for a good few fish this season.
Materials required Black sparton Micro thread
UTC 70 Hopper yellow Thread
Small Mirage Opal Tinsel
Hook Fulling Mill Grub size 14
Firstly tie in the Hopper yellow at the eye and run it down to the middle of the bend in touching turns.
Now tie in the black thread over the bottom of the Hopper thread. Once the hopper thread is secured and wont un ravel snip off the hopper thread and bobbin.
Now bring the black thread up in open turns to form the rib.
Now tie in a strip of mirage tinsel.
Now secure in to form a loop.
Snip the loop and pull tinsel forward on each side and tie in to form the cheeks.
Now whip finish and apply 4 coats of Sally Hansen Varnish.
